| |
|
Warranty
The Stucco RainScreen Panel™ System utilizing the panel manufactured
by Korax Technologies Inc. is designed to ensure that the wall
assembly which incorporates this panel is a true vented RainScreen
wall which satisfies current standards of cavity wall construction.
The Panel ensures that any water which enters into the cavity
of the panel will be directed to move down the inside face of
the panel and then be vented to the atmosphere via weep holes
or dry out by means of cross ventilation caused by the weep and
vent holes. Korax warrants for ten years that the Panel will
prevent water damage to the exterior wall assembly subject to
the following terms, conditions and limitations:
- all applicable construction drawings must be reviewed and have
a professional architect or engineer stamp affixed evidencing
that the basic principles of environmental separation as they
relate to building physics have been satisfied;
- this Warranty covers only defects directly attributable to defective
material supplied by Korax and does not cover workmanship or
defective material supplied by others, whether affiliated with
Korax or not;
- the Panel must be installed in strict compliance with Korax’s
written guidelines and all other requirements pertinent to
the construction of the cavity wall system. Without limiting
the generality of the foregoing, the assembly must incorporate
air vapour barrier and flashing at the correct location along
with control joint and deformation joints, proper connection
of the air vapour barrier to accessories such as windows, doors
and other penetrations; the wall assembly must be constructed
and maintained in accordance with proper moisture and water
management standards;
- this Warranty covers only damage to the exterior wall which is directly
attributable to the Panel and does not cover damage to any
structural components;
- this Warranty does not apply to any failure, defect or damage resulting
from or in any way connected with misuse, neglect, improper
storage, improper installations or installation not in strict
compliance with Korax’s specifications, use of accessories
which do not properly support the Panel, impact or foreign
objects, fire, hurricane, tornado, or other acts of God; defects
in, failure or damage to the foundation of the building, stress
fractures, or any other cause not involving inherent manufacturing
defect in the Panel;
- no representative of Korax or its dealers or anyone else is authorized
to make any change in or modification of this Warranty; this
Warranty represents the only warranty provided by Korax respecting
the Panel;
- this Warranty is non-transferable and is only for the benefit of
the undersigned;
- all claims under this Warranty must be made in writing, shall include
a copy of the original Korax invoice and shall be submitted
by registered mail to Korax at its then registered office address
in the Province of Alberta, immediately upon discovery of the
warranty defect or possible warranty defect;
- this Warranty shall be governed by the laws of the Province of Alberta
and all parties attorn to the jurisdiction of the courts of
the said Province for the purposes of any and all disputes
and actions relating to this Warranty;
- Korax or its representatives shall have free access to the Property
where the panel alleged to be defective was installed and
to remove any necessary samples in order to determine the
validity of any claim under this Warranty;
- the Panel must be paid for in full within Korax’s normal
credit terms;
- Should any of these terms, conditions or limitations not be strictly
complied with, this Warranty shall be null and void.
|
|
|
